We're excited to announce that we've added a new "recycle bin" feature for handling deleted devices. Now, when you delete a device, it will move to the built-in "Deleted Devices" group so that you can easily restore it in the future if needed. Devices in the "Deleted Devices" group do not count towards your active devices with regards to billing.
To delete a device, navigate to the device's configuration page, then click the "Delete Device" link at the top of the page. You'll be prompted to confirm the action.
If you navigate to the Devices page, you'll see a new built-in group called "Deleted Devices." The device you just deleted should show up there. Note that the main Dashboard does not show the "Deleted Devices" group.
To restore the device, you can either drag the device from the "Deleted Devices" group and drop it on another group, or you can click "Undelete Device" on the device's configuration page.
To permanently delete the device, click the "Permanently Delete this Device" link on the device's configuration page.
We're very excited to announce a feature upgrade for the Audio Player app! You can now configure a playlist of audio files to rotate through.
To get started with the Audio Player app, first upload some audio files on the Content page.
Next, add the Audio Player app to one of your devices.
In the Audio Player configuration dialog, click "Add Audio File," then choose the audio files you'd like to add to the playlist. If you need to change the order of the audio files, you can select one or more in the list and then click "Move Up" or "Move Down" to adjust their positions.
When you're finished configuring the list of audio files, click the green "Save" button, and you're all set! If the changes don't show up on your device immediately, click the "Reload Content Frames" link at the top of the device page to force a refresh.
We're very excited to announce a feature upgrade for the Custom URL app! You can now configure a list of websites to rotate through on a set interval. Using this you can now rotate through websites in a single large frame, rather than trying to fit a bunch of smaller Custom URL frames on one display.
To configure the URL slideshow, first, add a Custom URL app to your CloudShow device.
In the Custom URL configuration dialog, click "Add Website URL," paste in the URL, then click the green "Add Website URL" button. Repeat this process for any other websites you'd like to add to the list.
To configure how long you want each website to be shown, specify the interval in minutes. The default is 15 minutes, but you can set it as low as 1 minute.
When you're finished configuring the list of websites and the interval, click the green "Save" button, and you're all set! If the changes don't show up on your device immediately, click the "Reload Content Frames" link at the top of the device page to force a refresh.
|
Contributors
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
JigsawMania
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
We're very excited to announce a powerful new feature, Widgets! CloudShow Widgets allow you to overlay extra information on your content frames. You can add clocks, weather information, custom text/HTML, background audio/music, and more. To get started with Widgets just click the App icon for your content frame to open the radial menu.
Once the radial menu is open, click the Widgets icon and you'll be presented with a list of all the currently available widgets. Select the Widget you would like to add, then adjust it's settings and position.
Voila, you're all set! In the preview below you can see a clock overlaid on the News app. You can customize the look, location, size and more for each widget.
Try out the new Widgets feature today!
The CheckCentral API provides an endpoint for creating checks programmatically. All of the configuration options are available through the API, detailed below. To create a new check through the API, you will require an API token for your organization with Read/Write access. Organization administrators can create tokens through the API portal on your dashboard.
The endpoint is located at https://api.checkcentral.cc/createCheck/?apiToken=APITOKEN where the APITOKEN placeholder is replaced with your valid token. The request must be made with the Content-Type header set to application/json. The body of the request should contain as many of the properties listed below as required to define the check. Any properties not passed will be set to their default value.
For example, to create a new check that:
you would send the following json in the body of the request:
{
"name": "An API Check",
"email_alias": "apicheck",
"interval_type": "hour",
"interval_value": 2,
"active_days": [
"mon",
"tue",
"wed",
"thu",
"fri"
],
"success_conditions": {
"required_conditions": "any",
"conditions": [
{
"message_field": "subject",
"matches": "exactly",
"value": "Message Success"
},
{
"message_field": "body",
"matches": "contains",
"value": "No Errors Reported"
}
]
}
}
The check data must include a name property, as well as at least one of email_alias and matching_conditions to allow the check to be matched against incoming messages.
The complete list of possible properties for check configuration are as follows:
| Parameter | Type/Allowed Values | Default |
|---|---|---|
|
The name for the new check. The |
String | |
|
The plus alias for the check. This will be used to generate the custom email address for the Check along with your organization account name: account_name+email_alias@mycheckcentral.cc. At least one of the |
String | |
|
The rules that will be used to match incoming messages. See the definition of a ConditionGroup below. At least one of the | ConditionGroup | {} |
|
The ID of the group to assign this check. IDs may be retrieved from the getGroups API endpoint. |
String | |
|
A text description for the check. |
String | |
|
The interval unit CheckCentral will use to calculate the expected arrival time of incoming messages |
One of:
|
day |
|
The number of interval units (see above) used when calculating the expected arrival of incoming messages. |
Integer | 1 |
|
How many minutes after the interval has elapsed CheckCentral will wait before flagging the check as failed. |
Integer | 30 |
|
An optional time of day when messages will begin to be received. |
String | 00:00 |
|
An optional time of day when messages will cease to be received. |
String | 00:00 |
|
Pass an array of days to indicate which days the check should expect to receive messages. |
An array containing either
|
[ "all" ] |
|
Pass an array of personal notification services to configure the check to send alerts via those services. |
An array containing any of:
|
[] |
|
Pass an array of organization notification services to configure the check to send alerts via those services. |
An array containing any of:
|
[] |
|
Checks with this flag will send an alert when they are restored to a success state by an incoming message. |
Bool | true |
|
Checks with this flag set to false will only send alerts during the time window and active days configured above. |
Bool | true |
|
This parameter controls when CheckCentral will send alerts about repeated failure or warning messages. |
One of:
|
always |
|
If notify_consecutive_alerts is set to either after_n or every_nth, this parameter configures how many consecutive failures or consecutive warnings will trigger alerts. |
Integer | 1 |
|
The number of minutes this check will wait to send alerts about failures. If the check is returned to successful status before this period elapses, any pending alerts will be cancelled. |
Integer | 0 |
|
The default status for incoming messages that don't match against any of the conditions below. |
One of:
|
failure |
|
The rules that determine whether incoming messages will be set to success. See the definition of a ConditionGroup below. |
ConditionGroup | {} |
|
The rules that determine whether incoming messages will be set to warning. See the definition of a ConditionGroup below. |
ConditionGroup | {} |
|
The rules that determine whether incoming messages will be set to failure. See the definition of a ConditionGroup below. |
ConditionGroup | {} |
| Parameter | Type/Allowed Values | Default |
|---|---|---|
|
This parameter controls whether incoming messages must meet any or all of the conditions defined below to be considered a match. |
One of:
|
"all" |
|
If this flag is set, all of the conditions defined in this group will treat multiple whitespace characters as a single space. |
Bool | false |
|
The list of conditions for this ConditionGroup to match messages against. See the definition of a Condition below. |
Array[Condition] | [] |
| Parameter | Type/Allowed Values | Default |
|---|---|---|
|
Which part of the incoming message will be examined for this condition. |
One of:
|
subject |
|
What matching rule this condition will use. |
One of:
|
contains |
|
The value to use with the above matching rule and message component. |
String |
We're very excited to announce that ClipboardFusion 5.5 is now available for download! We've fixed a few bugs, improved the way our servers talk to ClipboardFusion, and added a new Macro function for a listview box with filtering capabilities!
We encourage everyone to update to the new version today to take advantage of these improvements. If you would like to see a complete list of all the changes, please view the ClipboardFusion Change Log. We would also like to thank all of the translators who have helped translate ClipboardFusion to their native languages.
CloudShow now supports uploading content from 3 new online sources: Dropbox, Google Drive, and Microsoft OneDrive! Using the all-new upload source selector you can choose where you upload your content from.
As before you can still upload content from your computer, and CloudShow now supports multiple file uploads at once. Just ctrl+click multiple files to select more than one and upload them at the same time.
If you store your files in Dropbox for work or personal use, CloudShow can access them now. You just need to authorize CloudShow to connect to your Dropbox account (as read-only) then just browse to the files you need.
If you use Google Drive to store your media files, CloudShow can now download them into your content section. Once you authorize CloudShow to connect to your Google Drive account (as read-only) your files are just a few clicks away.
If you're a Microsoft OneDrive user, you're in luck! CloudShow can now pull content from your OneDrive account into your CloudShow content. Simply authorize CloudShow to access your OneDrive files (as read-only) and you're all set.
Uploading files to your CloudShow content area is now easier than ever. Check out the new upload providers today!
Website Certificate Expiry Check
SUCCESS
WARN
|
Contributors
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
JigsawMania
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
